Achieve this decorative effect for ceilings and walls by applying Sandtex Trade High Build by trowel to give an even coating of 1-2mm thickness. Then, place the serrated edge of the texturing spatula in the material and turn through a half circle. Continue in rows with each subsequent row overlapping the previous one.

Apply an even coating of Sandtex Trade Cullaplast by trowel. Finish immediately by dragging a suitable float over the coating in a vertical and horizontal manner

Create this traditional, almost linear effect by applying Sandtex Trade High Build with a hawk or trowel to a thickness of roughly 1-2mm and then smooth off the peaks using the straight edge of a texturing spatula.

Achieve this richly textured effect by applying Sandtex Trade Cullaplast with a gravity-fed hopper spray

Achieve this consistent textured finish by using a gravity fed hopper spray to apply Sandtex Trade High Build spray over Sandtex Trade Fine Textured Matt

Apply an even coating of Sandtex Trade Cullaplast by trowel. Remove any excess material to the thickness of the aggregate until the aggregate ‘chatters’ under the trowel. Finish immediately by dragging a suitable float over the coating in a circular manner.

Apply an even coating of Sandtex Trade Cullaplast by trowel. Remove any excess material to the thickness of the aggregate until the aggregate ‘chatters’ under the trowel. Finish immediately by dragging a suitable float over the coating in a vertical direction.

Either apply randomly with a well loaded roller to distribute evenly, or apply by trowel an even coating of 1-2mm thickness. Finish with a roller in short overlapping strokes.